Posted on

Angstadt Arms – New Partnership Alert!

Announcing a new partnership with Angstadt Arms.  Angstadt Arms crafts 9mm compact, lightweight pistol caliber carbines that run on GLOCK® magazines.  We are selling their non-serialized parts on our site.

Here is a breakdown of the Angstadt Arms parts we will be selling:

  • 6′ 9mm AR-15 Barrel
    • Made from 4140 chrome-moly steel and finished with Melonite
    • Chambered in 9mm NATO
    • Lightweight profile
    • 6″ long
    • 1/2×36 thread
    • 9mm barrel extension
  • 9mm Bolt Carrier Group
    • 9mm bolt carrier group compatible for use with both GLOCK® and Colt® style 9mm AR-15 magazines without any further modifications
    • Machined from 8620 alloy steel with a QPQ black nitride finish
    • Compatible with both GLOCK® and Colt® 9mm AR-15 magazines
    • For use with a standard AR-15 hammer
    • Features removable weight for use with Law Tactical folding stock adapter
  • 5.5″ UDP Series Handguard
    • 5.5” free float M-LOK® hand guard with thin profile, modern 7 side design
    • Compatible with .223/5.56 and 9mm calibers
    • Free float, 7 sided design that allows for 45 degree offset mounting options
    • M-LOK® mounting interface on 7 sides
    • 2 QD swivel mounting points
    • Continuous top mil-spec 1913 picatinny rail
    • Compatible with both forged and billet upper receivers
    • Compatible with both 223/5.56 and 9mm
    • Handguard does not require timing and installs with a standard wrench.
    • Mil-Spec hard coat black anodize finish
    • Weight: 5.4 oz
    • ID: 1.375* The last ¾” of the handguard is bored out to 1.405”, allowing most aftermarket sound suppressors 1.39″ in diameter and smaller to tuck inside of the handguard when used with an exact length 6” barrel.
    • Length: 5.5”
    • Includes hardware
  • 9mm AR-15 1/2×36 Flash Hider
    • Made from 4041 hardened steel with a black nitride finish
    • Does not require the use of a crush washer. A crush washer can be used if specific timing is desired
    • 1/2×36 TPI
    • 1.75″ long
    • 2.1 oz
  • 0940 Pistol Caliber Upper Receiver
    • Compatible with 9mm, 40 S&W, 357 SIG, 45acp and 10mm
    • Machined from 7075-T6 billet aluminum with a matte black hard-coat anodized finish
    • Slick side upper receiver with pistol caliber sized ejection port and no forward assist or dust cover door
    • Works with any mil-spec lower receiver
    • Upper weight: 6.5 oz
  • 9mm Buffer Kit
    • Complete 9mm AR-15 buffer kit gives you everything you need to get your 9mm AR-15 running smoothly
    • It is compatible with both GLOCK® and Colt® style magazines
    • 5.4oz 9mm AR-15 carbine buffer assembly
    • Carbine buffer spring
    • 9mm buffer spacer
  • 6″ 9mm Complete Upper Assembly
    • Complete upper receiver pistol assembly is ready to run out of the box with any 9mm AR-15 lower receiver
    • 7075-T6 billet aluminum slick side pistol caliber upper receiver with appropriately sized ejection port
    • 6″ 9mm lightweight profile barrel made from 4140 chrome-moly steel with a 1-10” twist rate. 1/2×36 TPI
    • 5.5” free float hand guard with a modern, ergonomic, 7 side design
    • The hand guard features 2 QD swivel mounting points, M-LOK® mounting interface on 7 sides and a continuous top mil-spec 1913 picatinny rail
    • Handguard ID: 1.375* The last ¾” of the handguard is bored out to 1.405”, allowing most aftermarket sound suppressors 1.39″ in diameter and smaller to tuck inside of the handguard
    • Black nitride 9mm AR-15 bolt carrier group. For use with a standard AR-15 hammer
    • Compatible with both GLOCK® and COLT® style 9mm dedicated lower receivers
    • A2 style flash hider
    • Mil-spec charging handle
    • Weight: 2.6 lbs
    • Caliber: 9mm NATO

We are currently running the Angstadt Arms 0940 upper and lower set on our 9mm AR-15 pistol.  Pictures are seen to the left.  It’s a rear charge application that runs very smooth.  Every part on that build is offered on the site.  Click the message link below to receive a parts breakdown.

Stay tuned for the next 9mm AR-15 pistol build.  We will be utilizing the soon to be released Jack 9mm lower from the collaboration between Angstadt Arms and the Sharp Brothers.  We have big plans for this…so you better stay tuned.  Pictures will be seen on @gorilla_arms_llc on Instagram.

Check our selection of Angstadt Arms parts on the site.  Message us if you have any questions!

 

By: Admin